Princess 358225 Smart Tower Fan WIFI Connected Compact Portable 50W White
A fully checked and tested appliance in brand new condition with 1 year guarantee for peace of mind
Description:
Powerful tower fan which is easy to operate thanks to the included timer function and remote control. With 3 different wind modes (normal, natural and sleep) and 3 adjustable speeds this tower fan can be set to anyone's preferences.
| On/off switch | Yes |
| Item is or works on batteries | Yes |
| Tilt function | No |
| Settings | Yes |
| Number of bulbs | 0 |
| Mobile | Yes |
| Frequency(Hz) | 50 Hz |
| Quality mark EMC | Yes |
| Handle | Yes |
| Type of fan | Tower fan |
| Lamp base fitting | NA |
| Heating function | No |
| Maximum electrical power(W) | 50 W |
| Control panel | Digital |
| Noise level(dB) | 54 dB |
| Number of products in package | 1 |
| Power(W) | 50 W |
| Voltage(V) | 240 V |
| Suitable for space up to(m³) | 1 m³ |
| Charging time(h) | 0 h |
| Operating system | NA |
| Power indication light(s) | No |
| Bulb included | No |
| Timer function | Yes |
| Colour | White |
| Suitable for camping use | No |
| Anti-fall safety device | No |
| Material blades | ABS |
| Wi-Fi | Yes |
| LED indication | Yes |
| Number of settings | 3 |
| Energy class | NA |
| Blades excluded | No |
| Cordless | No |
| Type of Wi-Fi network | Single-band (2,4 GHz) |
| Collection tray | No |
| Power plug type | G - BS 1363 |
| Wind modes | Natural Normal Sleep |
| Diameter fan(cm) | 0 cm |
| IP rating | IP00 |
| Speed settings | 3 |
| Remote control | Yes |
| Charge by USB | No |
| Adjustable angle(°) | 0 ° |
| Suitable for damp spaces | No |
| Number of blades | 0 |
| Main material | Acrylonitril-butadieen-styreen |
| Power supply | Mains voltage |
| Power cord length(m) | 1.6 m |
| Dimmable | No |
| App available | Yes |
| Dimensions(cm) | 31,6 x 31,6 x 79,5 cm |
| Overheat protection | Yes |
| Rotating function | No |
| Quality mark KEMA | No |
| Non-slip feet | Yes |
| Wattage(W) | 50 W |
| EAN Item/Giftbox | 8712836979512 |
PLEASE NOTE – All Princess Smart Devices works on a WiFi frequency of 2.4Ghz. If you can’t connect your appliance to the app please follow the 4 steps at the bottom of the description.
*Description *
What should I do if I can't get my smart device connected to the app?
Our 'smart' products, which work in the Princess Home app, can be connected to these app using wifi. The devices all work on a wifi frequency of 2.4Ghz. New wifi routers are increasingly transmitting a wifi network with a frequency of 5Ghz in addition to the 2.4Ghz network, and this regularly causes failures during the installation of our apps. As a result, on the phone, for example, you cannot find the 'smart' device in the network. Below you can find some tips on how to fix this and still successfully connect your device to the app.
A mobile phone usually uses the strongest network, which in some cases is the 5Ghz network or the network of a Wi-Fi amplifier. If your phone is not on the 2.4Ghz network, you cannot connect to the device. In your phone's wifi settings, you can see the frequency of the network you are connected to.
Using the steps below will prevent your phone from not being able to find the device during installation.
- Turn off any wifi amplifiers during installation.
- Temporarily disable or rename the 5Ghz network during installation.
To make sure your phone does not connect to the 5Ghz network, you can temporarily disable it or change the name of the network. This will make it easier to connect to the right network.
This works differently for each router, check with your provider how to temporarily disable this. (You can also find instructions for this on the internet)
- Turn off mobile data on your phone during installation.
- Take sufficient distance from the router.
If you cannot turn off the 5Ghz network, make sure you are not too close to the router during installation. This is because the 5Ghz network is stronger than the 2.4Ghz network at a short distance, and the same applies the other way round. So take at least a few metres away from the router and make sure your phone is connected to the 2.4Ghz network.
After following the above steps, you can connect the app to the device. After installation, you can turn the networks and fan back on.
| RRP | 89.99 |
|---|---|
| EAN | 8712836979512 |
| Condition | New/Repackaged |
| Corded/Cordless | Corded |
| Power | 50W |
| Cord Length | 1.6m |
| Colour | White |
| Dimensions | 31.6 x 31.6 x 79.5 cm |
