Princess 350000 Smart Tower Fan 50W 3 Speed Settings Smart Control Black

3 speeds

Stay cool on hot summer days with the Princess 350000 Smart Tower Fan. Thanks to its oscillating function and 3 speed settings you can enjoy a refreshing breeze from anywhere in the room. You can even set a timer for up to 8 hours – perfect for keeping you cool while you sleep.

Smart controls

You can control the 350000 Smart Tower Fan by using the HomeWizzard Climate app on your phone. The app is also compatible with Amazon Alexa and Google Assistant. That means you can set the fan to turn on as soon as you arrive home from a long day at work.

Safe and easy to use

The fan switches itself off when it detects an unsafe temperature, giving you peace of mind. The carry handle also makes it easy to move around your home, so that you can use it in any room you need it in.

Specifications

Technical specifications for PRINCESS 350000 Smart Tower Fan – Black

Overview

• Type - Tower fan
• Power - 50 W
• Speed settings - 3
• Cool air function - Yes
• Timer - 480 minutes
• Digital display - Yes - LED
• Safety cut out - Yes
• Other features - Non-slip base

Design

• Portable - Carry handle
• Control type - Touch
• Bladeless design - Yes
• Tilt - No
• Pivot - 0-80 degrees
• Oscillation - Yes
• Noise level - 54 dB
• Assembly required – Yes

Power

• Power cord length - 18 m
• Power supply - Mains
• Power consumption - 05 kW

Smart

• WiFi-enabled - Yes
• Smartphone app - HomeWizzard Climate app
• Control method

- iOS
- Android
- Windows
- Mac

General

• Colour - Black
• Dimensions - 1037 x 315 x 316 mm (H x W x D)
• Weight - 11 kg

What should I do if I can't get my smart device connected to the app? 

Our 'smart' products, which work in the Princess Home app, can be connected to these app using wifi. The devices all work on a wifi frequency of 2.4Ghz. New wifi routers are increasingly transmitting a wifi network with a frequency of 5Ghz in addition to the 2.4Ghz network, and this regularly causes failures during the installation of our apps. As a result, on the phone, for example, you cannot find the 'smart' device in the network. Below you can find some tips on how to fix this and still successfully connect your device to the app. 

A mobile phone usually uses the strongest network, which in some cases is the 5Ghz network or the network of a Wi-Fi amplifier. If your phone is not on the 2.4Ghz network, you cannot connect to the device. In your phone's wifi settings, you can see the frequency of the network you are connected to. 

Using the steps below will prevent your phone from not being able to find the device during installation. 

1. Turn off any wifi amplifiers during installation.  

2. Temporarily disable or rename the 5Ghz network during installation. 

To make sure your phone does not connect to the 5Ghz network, you can temporarily disable it or change the name of the network. This will make it easier to connect to the right network. 

This works differently for each router, check with your provider how to temporarily disable this. (You can also find instructions for this on the internet) 

3. Turn off mobile data on your phone during installation. 

4. Take sufficient distance from the router. 

If you cannot turn off the 5Ghz network, make sure you are not too close to the router during installation. This is because the 5Ghz network is stronger than the 2.4Ghz network at a short distance, and the same applies the other way round. So take at least a few metres away from the router and make sure your phone is connected to the 2.4Ghz network. 

After following the above steps, you can connect the app to the device. After installation, you can turn the networks and amplifiers back on.