Manrose MF100T NEW In-Line Duct Fan Extractor with Timer 3 Speeds Fan 25W Black

Product features:

• Powerful in-duct mounted mixed flow extractor fan designed to produce higher working pressures for applications that require high air flows, with low relative noise. Can be mounted in a variety of applications and are suitable for use with either rigid or flexible ducting (100mm diameter)
• High quality ball bearing, long life motors. 3 speed settings selected via internal dip switch
• Performance (on maximum speed): Extract rate: 68 litres per second, 245 cubic metres per hour. Power consumption 25 watts. Sound output 25dB(A) @ 3m
• Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction. Fully Building Code compliant. BEAB approved. CE Approved
• Class II - double Insulation - no earth required. Built in run on timer (see important information at product description below regarding connection requirements)

Product Description

Designed to be operated in conjunction with the room light. When the light is switched on the fan starts, when the light is switched off the fan continues to run for the pre-set time (which is adjustable). IMPORTANT: Requires a permanent live, switched live and neutral connection (3 wires excluding earth) at the fan position in order for the timer functionality to operate correctly. If you do not require the timer function please select alternative product MF100S

The Manrose MF100T is a powerful inline extractor fan which is ductable up to 12m. An inline fan is installed in the loft or ceiling void above the bathroom (or kitchen etc). Ducting is attached to each end of the fan with one  length going to an internal grille in the ceiling of the bathroom and the other going to a grille on the external wall, soffitt or roof.

Inline fans are particularly great for bathrooms because you can site the extraction grille directly above the shower or bath, thus extracting the steam at source. With no electrics in the bathroom they are easy to install, saving both electrician and decorating costs and since they are housed in the loft or ceiling void the noise levels are also extremely low.

This particular model; the MF100T, features an over-run timer which keeps the fan running for a period of up to 20 minutes (set upon install), after power off, to ensure all moisture or stale air is extracted.

Please note, the use of a humidistat is not possible with this model.